Enrollment Closing In:
hours minutes and seconds
hours minutes and seconds
The Ultimate CNC Workflow To Get Started Fast
And Consistently Create Finished Projects You’re Proud Of
Learning CNC Is Hard.
The Ultimate CNC Workflow To Get Started Fast And Consistently Create Projects You’re Proud Of
When you get your first CNC machine, we all have the dream of how easy it’s going to be.
Just load up a project file, plop a piece of wood on your machine, push “Go!”, and out comes a perfectly finished product.
But then you start your first project and realize how technical the process is!
Broken bits. Wasted materials. Constantly worrying about your machine breaking (which costs thousands of dollars!)…
And what you thought was going to be a fun new hobby – Quickly turns into frustration, anger, and a CNC machine collecting dust in the corner.
From the shop of Andy Bird
Elizabethtown, Kentucky
From CNC Failure To Six-Figure Success
I remember one of my first projects, I had everything set up – or so I thought…
But one unchecked box in the software and the machine PLUNGED too deep on the first pass and tore through a beautiful $100 piece of walnut.
The wood was ruined, and so was my confidence.
I tried a few more projects without much success, and actually stopped using my CNC for over 6 months because I didn’t know where I was going wrong.
Luckily I Stuck With It…
But after a lot of trial and error, and thousands of dollars lost in wasted materials and tools – I started making some progress.
And now, nearly 7 years later:
- I’ve successfully created thousands of finished projects with my CNC
- I’ve sold tens of thousands of dollars of CNC products through Etsy (Even wholesaling to businesses like Saturday Night Live and HGTV)
- I’ve built a YouTube channel with over 125,000 subscribers teaching others how to create and sell products with their CNC
I’ve successfully created thousands of finished projects with my CNC
I’ve sold tens of thousands of dollars of CNC products through Etsy (Even wholesaling to businesses like Saturday Night Live and HGTV)
I’ve built a YouTube channel with over 125,000 subscribers teaching others how to create and sell products with their CNC
And what I’ve come to realize after helping thousands of CNCers on YouTube and in my online courses is…
There’s No Comprehensive Resource For Learning
How To Operate Your CNC From Start To Finish
There’s No Comprehensive Resource For Learning How To Operate Your CNC
The thing is, there is no one resource that teaches you step by step how to operate your CNC successfully.
You can learn how to use the software, but that’s only one piece of the puzzle.
And what I see happen all too often is folks who start with the software end up stuck in the weeds drawing vectors and creating projects from scratch…
Instead of actually making REAL THINGS with their machine!
You Didn’t Buy Your CNC To Learn Software
You Bought Your CNC To Make Things!
You Didn't Buy Your CNC To Learn Software, You Bought Your CNC To Make Things!
Think about it: In an industrial setting, when you’re working in a machine shop, you don’t learn how to design first. You learn through making things.
Once you learn how to zero your machine, how to use the bits correctly, and sand and finish your project…
Then you can move onto the design and setup!
So if you want to start creating finished projects as fast as possible, you need to learn how to operate your CNC first.
Which is why...
I Created A Super Simple CNC Workflow That ANYONE Can Master In A Weekend
I Created A Super Simple CNC Workflow
That ANYONE Can Master In A Weekend
After seeing so many CNCers getting frustrated with their machines, I’ve created a super simple CNC workflow to help you get up to speed as fast as possible.
With “ready-to-run” files and holding your hand through all the hard stuff, so you can focus on learning the workflow and creating awesome projects right from the start.
Because once you hold that first successful project in your hand, it lights a fire under you, and I guarantee you’ll be hooked.
The best part is, this workflow is the same no matter how advanced the project: From your very first set of coasters to more advanced projects like 3D relief carvings and wood inlays.
Which is why…
After many months of work, I’m incredibly excited to introduce…
The CNC Kickstart is the only program of its kind that walks you step-by-step through every phase of the CNC creation process.
This course streamlines your entire workflow, using premade files, setup guides, and materials checklists to get you over the design hurdle and creating products right from the start.
Covering everything from how to setup your machine, choosing the right bit, setting up toolpaths, feeds and speeds, and even how to sand and finish your projects…
Giving you the confidence and skills to turn ANY project file into an enjoyable and successful finished product you’ll be proud of.
What You Get:
20 step-by-step video tutorials
Follow along with me every step of the way, as we create 6 enjoyable and useful CNC projects that increase in complexity.
Each project is designed to teach you a new set of skills and build your confidence as you work your way through the course. (See below for a project by project break-down)
Project Playbooks
On top of the video tutorials, you’ll also get printable “Project Playbooks” for each project – Giving you an easy-to-follow checklist you can use for future projects.
These playbooks also include a detailed list of materials and tools needed for each project, so you can prepare ahead of time instead of running back and forth to the hardware store.
15+ skills walkthrough videos
Each project also includes multiple “Side Quest” videos that take deep dives into important CNC techniques and skills…
These side quests include: Basic toolpaths, downcut and upcut bits, feeds and speeds, workholding basics, making trays, materials preparation, V-Carving, V-bits, compression bits, fillets, using plywood, 3D materials, 3D finishing, and more!
But Don't Take My Word For It
Check out What Other Students Had To Say About My Courses
Paul J.
Kevin R.
“I think the CNC Kickstart is perfect for new CNC users because there is a lot to learn up front and it helps take the guesswork out of where to start and what settings/tools to use.
I also really like the playbooks! They are not only helpful for new users but even as an ongoing practice to ensure good planning and achieving consistent project outcomes.”
Mike M.
Project Breakdown
Project 1
The Cutter Caddy
In our first project, we’re going to be making an organizer for your work area.
This not only will help you organize your bits, clamps, and all the different things you’ll need to operate your CNC…
But this project is also specifically designed to help you build confidence and momentum as you work your way towards more advanced projects later in the course.
Through making this organizer you’ll learn the basics of CNC operation, get your first look at the Super Simple CNC Workflow, learn how to source materials, and setup pocketing and profile tool paths.
- Side Quests: You’ll also gain access to your first set of Side Quests which include pocketing toolpaths, profile toolpaths, and using downcut and upcut bits.
Project 2
The BBQ Buddy
In Project 2 we’ll be creating The BBQ Buddy, which is a grill scraper and bottle opener i.e. your perfect BBQ buddy!
To create this project, we’ll use the same Super Simple CNC Workflow from Project 1 and build on our profile and pocketing toolpath skills.
We’ll also be changing materials from pine to cedar, which is a great material that’s easy to source from any hardware store and rot resistant.
- Side Quests: The side quests for Project 2 include deep dives into feeds and speeds and workholding techniques.
Project 3
The Troop Tray
In Project 3 we’ll tackle The Troop Tray, where we’re making an American flag themed catch all tray.
This may be one of my favorite projects and really kicks up the complexity!
We’ll again use the Super Simple CNC Workflow and this time include multiple tool paths and utilizing different bits.
We’re also going to be working with hardwoods for the first time, and I’ll show you how to prepare hardwoods properly to guarantee a perfect cut.
- Side Quests: Making trays is one of my favorite things to do with the CNC and we've got a deep dive on best practices as well as how to prep your stock before your first run.
Project 4
The Warm Welcome Sign
In this project, we’re making a “warm welcome” sign you can hang on the front door. (Or sell at craft fairs and Etsy!)
As always, we’ll use the Super Simple CNC Workflow, and this time include V-carving!
This is definitely a more challenging skill compared to pocketing and profile toolpaths…
And I’ll show you how to use the same CNC workflow to get up to speed fast and start V-carving successfully.
- Side Quests: The side quests for Project 4 include a deep dive into V-carving and how to mask and paint your V-carves for adding color.
Project 5
The Tiny Table
In Project 5 we’ll be making The Tiny Table Topper, which is a fun kids table with a flat pack design.
We’ll focus on machining plywood, how to use compression bits, and learn what the heck a fillet is and how it opens up the world of joinery.
We’re upgrading to a more advanced CNC machine for this project, but don’t worry, I’ll show you how you can use any CNC and the Super Simple Workflow to successfully finish this project.
- Side Quests: As always, we’ve got more side quests at the end of Project 5, which include using compression bits and a deep dive into fillets and working with plywood to successfully create flat pack furniture.
Project 6
The Reptile Relief
For our final project, we’re going to make a popular 3D swimming crocodile with 3D relief carving.
3D relief carving is a lot of fun but also requires a higher level of detail, and I’ll show you how to use a tapered ball nose in this project to get that added detail with ease.
We’ll also be working with walnut for the first time, and I’ll share some tips and tricks for mastering this beautiful wood.
- Side Quests: For our final side quests, we’ll dive deep into the best materials to use for 3D reliefs and finishing techniques specifically for 3D relief projects.
LIMITED TIME OFFER
Get $691 In Valuable Bonuses FREE When You Join Today!
BONUS 1
Course Workbook & Project Playbooks ($197 Value)
The first bonus is the course workbook which includes detailed notes and a project playbook for each project in the course.
We’ve gone through multiple runs for each of these projects, and worked out all the kinks…
So all you have to do is download the project file, load it into your software, verify a few simple things on your machine…
And then follow along step by step with each Project Playbook to easily create a successful finished product!
But the only way to get all 6 of these Project Playbooks is by joining The CNC Kickstart during this special launch.
BONUS 2
Feeds And Speeds Calculator ($197 Value)
The #1 question I get asked from CNCers is how to understand feeds and speeds…
Which is why I created this Feeds and Speeds Calculator to remove the guesswork and give you the exact specifications you need for the perfect cut every single time.
It doesn’t matter what level machine you have, what bit you’re using, or the material…
Just plug the variables into this calculator and it will spit out the exact numbers you need.
But if you want FREE access to The Feeds and Speeds Calculator, you must join The CNC Kickstart during this special launch!
BONUS 3
The Wood Inlay Masterclass (With Broinwood) ($297 Value)
The third and final bonus is a special Wood Inlay Masterclass with the absolute world’s best V-Carve inlay master Nick from Broinwood.
This beginner friendly project is the perfect stepping stone into the vast world of CNC inlays…
And we’ll walk you step by step through exactly what bits to use, how to assemble the project, and how to finish this beautiful walnut and maple cutting board to look flawless.
We could easily sell this as a stand alone course, but if you join during this special launch, you can get the Wood Inlay masterclass for free!
Lifetime Access To Everything
Busy schedule this month? Taking a much needed vacation and going to be away from your machine?
Don’t worry! The CNC Kickstart has full, lifetime access. Once you’re signed up you can access the course whenever, wherever you like.
This means you can take your time completing the projects at your own pace. If you don’t have time right now, simply wait until you’re ready and then dive in.
30 Day Money-Back “Proud Project” Guarantee
On top that, I believe in this course so much, I’m also including a no questions asked 30 Day Money-Back “Proud Project” guarantee.
This gives you a full month to try out the course, apply what you learn…
And if you don’t see an immediate impact in your CNC skills, if you don’t have a new-found confidence every time you turn on your machine…
Heck, if after 30 days, you don’t have the skill to create one new project that you’re so proud of you’d be happy to give it as a gift to a friend or family member, just shoot my team a message and I’ll send you 100% of your money back!
Just make an honest attempt at applying what you learn in this course, and I will literally guarantee you level up your CNC skills.
Enrollment Closes In:
hours minutes and seconds
hours minutes and seconds
Let's Recap Everything You Get
- CNC Kickstart Program – Lifetime Access ($497 Value)
- Bonus #1 – Workbook & Project Playbooks ($197 Value)
- Bonus #2 – The Feeds & Speeds Calulator ($197 Value)
- Bonus #3 – The Wood Inlay Masterclass ($297 Value)
TOTAL VALUE: $1,188
You Get It All Today For:
$
149
Stop Letting Your CNC Collect Dust in The Corner!
When you buy your first CNC, we all have the dream of thinking how fun it will be and maybe even turning it into a side hustle…
But then you hit that first roadblock, or life gets in the way, and too often that’s when people give up.
I’m here to help you simplify the process, to be your guide…
And when you follow my Super Simple CNC Workflow, I guarantee you’ll have a newfound confidence and skillset to make anything you want with your CNC.
A CNC Workflow That Works. Every. Single. Time.
The pride you feel when you hold that first finished product in your hands is priceless.
And whether you give it to a loved one or sell it for a profit, it’s the creation process that makes it all possible.
Don’t waste hours or even years bashing your head against the wall like I did…
Instead take my knowledge, and the time we put into ironing out all the kinks in these projects, and start seeing guaranteed results the very next time you turn on your machine.
It all starts by clicking the “Enroll Now” button below, and I’ll see you on the inside!
Andy Bird
Creator of Andy Bird Builds
GOT QUESTIONS?
Frequently Asked Questions
This course was specifically designed for the busy hobbyist who doesn’t have a lot of free time.
All you need is 2-3 hours a week to put towards your CNC hobby and I guarantee you will start consistently creating finished products you can be proud. (Or I’ll give you your money back!)
This course is for ANYONE who wants to learn how to operate their CNC machine more effectively.
If you’re new to CNC, or even if you don’t have a machine yet, this is the perfect course to get you up and running fast with 6 CNC projects that increase in difficulty.
But even if you’ve had a CNC for years, if you want to learn a CNC workflow to speed up your projects, as well as learn more advanced techniques like 3D relief carving and wood inlays, then you’ll also get a ton of value from this course.
Nope! It doesn’t matter what machine you have, and I’ve included examples from all the major CADCAM software (Vetric, Fusion360, Easel, Cardco, and Carbide Create)
This course is designed to be a comprehensive course, where each project builds off of the last one and includes project files, materials lists, plans and walks you step by step through everything you need to complete each project.
If you tried to find similar information on YouTube, you’d have to sift through years of videos that can easily lead to overwhelm or wasted time because it’s not organized into a step by step process – And wouldn’t include any of the Project Playbooks or materials lists.
After purchasing you will receive an email that includes login details and a link to sign into a private members area that houses all the videos.
Once enrolled, you will have lifetime access to The CNC Kickstart videos.
We’ve created a custom learning platform on our own server so that you’ll never lose access to the training videos and bonus content. (As well as any future materials I may add to the course down the road)
Currently The CNC Kickstart is open for enrollment, but once the timer hits 00:00:00 I’m closing down access to focus on the customers who join.
I do plan to re-open the course in the future, but have no set date and expect it to be months from now. So if you’re at all interested in joining, I’d highly suggest doing it now while you still can. (Especially since you get lifetime access to all the materials!)
Yes! That’s why I created my 30 Day Money Back “Proud Project” Guarantee.
Here’s how it works: Join the program, and if you don’t create one new project you’re proud of with your CNC in the next 30 days, you can get your money back!
Just shoot my team a message and we’ll send you a prompt and courteous refund.
Copyright © 2025 – Andy Bird Builds – Made in partnership with Alters House Publishing