The CNC Side Hustle (Expired) › Forums › CNC Tech Forum › Project Files › Reply To: Project Files
-
Hey Bryan,
Based on what you described, the first thing I’d go back and verify inside Carveco Maker is that your imported SVG workflow is matching that original setup exactly:
-Make sure your material thickness is set to your actual board thickness, not assumed thickness.
-Make sure your bowl pocket is referencing top of material for Z-zero.
-Make sure the pocket toolpath is a true pocket / area clearance style operation and not something that is being interpreted as a full cut-through.
Before cutting, preview the pocket toolpath and confirm the maximum depth is staying inside the tray shape instead of treating the center like a through-cut.
That leftover center circle you mentioned sounds like Carveco may be reading part of the imported geometry differently than the original project file, which would also line up with the “closed vectors” message you’re seeing on the flag pass.
Since you’re using Carveco Maker instead of the original Carbide Create file, that part becomes a software-specific issue. We don’t troubleshoot third-party software settings directly, so the best next step for the closed-vector/import behavior is to reach out to Carveco Maker support and ask them how they want that SVG cleaned up or converted for a pocket plus flag-carve workflow.
Hope that helps,
Miranda
