The CNC Side Hustle (Expired) › Forums › CNC Tech Forum › issue with create a State when running Vectric VCarve Desktop 12.511
-
issue with create a State when running Vectric VCarve Desktop 12.511
Posted by Randy on November 14, 2026 at 7:44 pmThe files provided in the CNC Kick are for Vectric v11. However, when running the program (create a State, State of Pennsylvania) using VCarve Desktop 12.511, the actual result dimensions of the carve ends up being 4” x 2 1/4″ x 1/2″. Am I missing an update with your files or what am I doing wrong?
Miranda replied 2 days, 21 hours ago 2 Members · 3 Replies -
3 Replies
-
The files being created in Vectric V11 shouldn’t automatically cause a sizing issue when you’re using VCarve Desktop V12.511.
A couple of things I’d recommend checking:
-
Job Setup: Make sure the material dimensions and thickness match what’s shown in the project lesson.
-
Design Size: Select the Pennsylvania design and check its width and height in VCarve. Make sure the design hasn’t been resized or scaled.
-
Toolpaths: Recalculate the toolpaths after verifying the dimensions. Then use the Preview Toolpaths feature to confirm the finished size before cutting.
-
Post-Processor: Make sure you’re saving the recalculated toolpaths using the correct post-processor for your CNC machine.
If the design and toolpath preview both show the correct dimensions, but the finished piece is coming out smaller, that would point to a different issue than the original project file.
-
-
Job Setup: I verified the material dimensions I used (in my case X=14.625, Y=7.375, and Z= 0.75)
Design Size: The width and height shows 4″. What is the width and height supposed to be for Pennsylvania and written in the design file? I do not see anything that indicates that the design was resized or scaled.
Toolpaths: I cannot check this due to the above comment
Post-Processor: I have verified that I am using the correct post-processer for my Machine.
-
Based on what you’ve described, it sounds like the Pennsylvania design itself is set to approximately 4 inches wide, which would explain why your finished project is coming out that size.
One thing worth clarifying is that the material dimensions in Job Setup don’t determine the size of the actual design. They simply tell VCarve how large your material is.
I don’t have the original Pennsylvania file specifications in front of me, so I can’t confirm whether 4 inches is the intended design width. I also don’t want to give you an incorrect measurement.
If you’d like to make the Pennsylvania design larger, you can select the vectors in VCarve and use the Set Selected Object Size tool to adjust the width. Just make sure the option to link the X and Y dimensions is enabled so the design maintains its proportions.
Once you’ve resized the design, you can recalculate your toolpaths and check the preview before cutting.
The fact that you’re using VCarve Desktop 12.511 instead of V11 shouldn’t, by itself, cause the design to shrink.
Log in to reply.
