The CNC Side Hustle (Expired) › Forums › CNC Tech Forum › Reptile Relief file issue › Reply To: Reptile Relief file issue
-
Hey Jason,
Thanks for reaching out! Glad to hear you’re diving into the Reptile Relief project!
I can see how that would be confusing, especially when you’re expecting to see the crocodile model and only getting the profile toolpath.
The Reptile Relief project uses a 3D crocodile model along with separate roughing and finishing toolpaths.
Here’s what I’d recommend checking first:
-
Make sure you’ve downloaded the complete project ZIP folder from the Reptile Relief lesson and extracted all the files before opening anything in Vectric.
-
Open the M7-Crocidile.crv file and check whether the 3D model is visible in the 3D view.
-
The project requires Vectric VCarve or higher, so make sure you’re using a compatible version.
You can also go back through the Reptile Relief lesson and follow the setup steps in the project playbook.
If the crocodile model is still missing after those checks, let us know. We can help determine whether there’s an issue with the course download.
Give that a shot and let us know how it goes.
-
